FAQ
To keep the electrode functioning optimally, it is necessary to clean it manually at regular intervals. You can clean the electrode according to the step-by-step plan below.
Step 1:
Switch off the pump and remove the plug from the wall socket
Step 2:
Unscrew the filter housing from the spa tub and use the plugs provided to cover the inlet and outlet to prevent draining
Step 3:
Remove the four screws from the transparent cover using a crosshead screwdriver and take it off (See figure 1 and 2)
Step 4:
Unplug the electrolytic cell. Unscrew the nut of the electrolytic cell anti-clockwise using the supplied tool (See figure 3 and 4)
Step 5:
Remove the electrolytic cell and place it in a container and pour in cleaning vinegar until the electrode is submerged
Step 6:
Place the titanium electrode in a container and pour cleaning vinegar until the titanium electrode is submerged. Let the plates soak for at least 1 hour. For severe deposits, an overnight soak is recommended. Rinse the electrode under the tap or with a garden hose. (See figure 5 and 6)
Step 7:
Follow the above steps in reverse order to replace the electrolytic cell.
![](https://intexcompany.hr/wp-content/uploads/2023/05/spad7-cisteni-elektrody.jpg)
If the problem has not been solved, please contact local service centre for further assistance.